Cabletron Systems Netlink FRX4000 User Manual page 355

System Events
411.
Received Reset LCN = "n", cc = "n" dc = "n"
Severity: 4
Meaning: A Reset was received on the designated LCN, with the cause code
and diagnostic code
cc
Action: None.
412.
Received Reset Confirm
Severity: 4
Meaning: A Reset Confirmation was received.
Action: None.
413.
PAD Link Failed
Severity: 2
Meaning: Self-explanatory.
Action: Check the async PAD port and its cables for proper operation and
secure connection.
414.
Beginning of Congestion
Severity: 4
Meaning: The level of
4) has been exceeded, and no more events will be put into the event
buffer until the
Defaults) has been reached.
Action: If this occurs frequently, you may want to increase the level of
Maximum Congestion
415.
End of Congestion, "n" events lost
Severity: 4
Meaning: The
Minimum Congestion
Action: None.
416.
PAD Autocall Retries Exhausted
Severity: 3
Meaning: The async PAD retry timer has expired without a connection being
established.
Action: None; however, if this occurs with any frequency, you may want to
increase the timer (
problems.
417.
Frame Relay Link Failed
Severity: 1
Meaning: The physical link is down.
Action: Check the cables for secure connections and proper operation.
. (See Appendix B
dc
specified in Node Defaults (see Chapter
Max Congestion
level (also specified in Node
Min Congestion
specified in Node Defaults.
level has been reached. (See event 414.)
) or check the remote async device for
Retry Count
for a list of codes.)
21-11