Configuring Subscriber Ids - Cabletron Systems Netlink FRX4000 User Manual

Incoming Access Allowed
Outgoing Access Allowed
Add/Change CUG
Delete CUG
Display All CUGs

Configuring Subscriber IDs

Configuring X.25
determines whether this port will be allowed to receive calls from outside its CUGs.
determines whether this port will be allowed to make calls outside its CUGs.
To configure a CUG, select this entry and, when prompted, enter:
CUG Index,
0-99
CUG number,
1-16383
any other requested information. (See
To delete a CUG, select this item and enter the index (see
CUG to be deleted.
Selecting this item will display a list of all configured CUGs.
This operation configures the called and calling addresses that will be used in call
setup. To complete the connection, the software must recognize where the call is
coming from (calling address) and where it is going (called address).
To display a list of current Subscriber IDs (addresses), press
Routing Paths Menu (or
To add or change a Subscriber ID, press
Menu. When prompted, enter a Subscriber ID of up to 15 digits. (ID conventions are
described on page 8-22.)
(the default is ), which is a reference to the CUG.
0
(the default is ), that will be associated with the index.
1
Table 8-5
, , from the Main Menu).
[A] [D] [A]
at the Connections and Routing Paths
[B]
on page 8-16.)
"Add/Change CUG") of the
at the Connections and
[A]
8-21