Disabling And Enabling Sdlc Pus; On-Line Sdlc Pu Operations Menu - Cabletron Systems Netlink FRX4000 User Manual

Disabling and Enabling SDLC PUs

18-14
Press at the Operations Menu to display the following:
[G]
On-Line SDLC PU Operations
A Disable an SDLC PU
B Disable a Range of SDLC PUs
C Enable an SDLC PU
D Enable a Range of SDLC PUs
Option::
Figure 18-2 On-Line SDLC PU Operations Menu
These operations disable or enable the link station connection between the node and a
PU or a range of PUs (grouped by sequential port numbers).
Select the desired operation from the menu. When prompted:
If enabling or disabling a single
P: on FRX4000,
RL 0
: .
Port 0–7
PU station address
If enabling or disabling a range of PUs, enter:
:
From RLP 0
:
From port 0–7
: on FRX4000,
To RLP 0
:
To port 0–7
, enter:
PU
on FRX6000.
0–7
: .
0–ff
on FRX4000, on FRX6000.
0–7
.
on FRX6000.
0–7
.
Node Name=node_xyz
[B],[G]
from Main Menu
FRX4000/FRX6000 4.0 User Guide, Rev 01