Chapter 4 Configuring Node-Wide Default Parameters; Node Defaults; Node Defaults Configuration Screen 1 - Cabletron Systems Netlink FRX4000 User Manual

Node Defaults

Configuring Node-Wide Default Parameters
Node Defaults are a set of parameters that identify an FRX4000 or FRX6000 for pur-
poses of remote control, software updates, file transfers, and/or alarm reporting to or
from a remote FRX, SmartSwitch 1800, or FRM. The Node Defaults file also contains
information that defines a connection to a NetView manager device.
Press at the Node Configuration Menu to display a screen similar to Figure 4-1.
[C]
This is the first of three Node Defaults screens—pressing
the display among the three screens.
The first two screens contain parameters that apply to all users. The third screen con-
tains parameters used in sessions between a NetView host and the NetView service
point function in the FRX4000/6000. If the NetView function will not be used, the
third screen does not have to be configured.
Node Defaults Configuration (Screen 1 of 3)
A Node Name
B Remote Control ID
C Remote Control Pwd
D File Transfer ID
E File Transfer Pwd
F Collecting Node ID
G Collecting Node Pwd
H Primary Alarm Output ID
I Primary Alarm Output Pwd
J Secondary Alarm Output ID
K Secondary Alarm Output Pwd
Option:
Figure 4-1 Node Defaults Configuration Screen 1
[PgDn]
Node Name=node_xyz
Database System Memory
node_xyz node_xyz
from Main Menu
[A],[A],[C]
Chapter 4
or will change
[PgUp]