Producing A Configuration Report; Where To Find Configuration Information - Cabletron Systems Netlink FRX4000 User Manual

Producing a Configuration Report

Where to Find Configuration Information

3-10
A configuration report contains this information:
Software version number
Passwords
Boot time
Various database parameter values
Line status for each port
To create a configuration report, press
Main Menu). The report is created and saved to the node's hard disk under the name
REPORT.TXT.
You cannot generate a configuration report while a file transfer is in
progress.
To display the configuration report, press
Main Menu).
The following shows where to find the various configuration files among the menus.
(The first item,
A–Configuration
are the chapters/appendices in this manual where the items below those entries are
described. Following most items in the lower tiers are descriptions of the associated
database records.
A Configuration
A Configure Node
A Configure Password
password.
B Configure Time and Date
date that will be displayed on some screens and reports, and will allow
all FRX nodes on a network to be in sync, regarding reports and alarm
messages that include the date and time.
C Configure Node Defaults
used for remote control, file transfer, and alarm routing and reporting
operations.
D Configure SNMP Parameters
manager; defines communities; SNMP trap routing, and hardware
platforms (for identification by Netlink OmniView element manager).
A Configure System Defaults
B Configure Community Table
C Configure Trap Routing
D Configure Model Number
at the Reports Menu (or
[A]
at the Reports Menu (or
[B]
, is an entry on the Main Menu.) Following some items
– (Chapter 2) allows changing the default login
– (Chapter 2) allows setting a correct time/
– (Chapter 4) specifies IDs and passwords
– (Chapter 16) identifies the SNMP
FRX4000/FRX6000 4.0 User Guide, Rev 01
, from the
[F] [A]
, from the
[F] [B]