Ipx Filter Applications Parameters; Configuring Ipx Interfaces; Ipx Interface Record Example - Cabletron Systems Netlink FRX4000 User Manual

IPX Filter Applications Parameters

Permit
Filter "n"

Configuring IPX Interfaces

Configuring IPX
Table 14-6 IPX Filter Applications Parameters
Parameter
Permit
Filter "n"
Determines whether the traffic defined by the
denied passage across the interface.
corresponds to the
Filter ID
An IPX interface allows an FRX4000/6000 to connect to a Novell IPX network. Press
at the IP/LLC2/BRIDGE/IPX Interfaces Configuration Menu (or
[E]
from the Main Menu) to display configured IPX interfaces.
To configure an interface, press
ration Menu. When prompted, enter an
sequential number to identify the interface.)
The display depends on the interface; the following figure shows an example, and
Table 14-7 through Table 14-9
IPX Interface Configuration
* Interface Number
A Blocked Port Flag
B Interface Type
C Frame Type
D Maximum Transmission Unit
E IPX Network Address
F Priority
G Bandwidth Allocation Group
H Port Diagnostics Enabled
I NetBIOS Enabled
J NetBIOS Hops
K Periodic RIP Enabled
L Periodic RIP Timer (sec)
M Periodic SAP Enabled
N Periodic SAP Timer (sec)
O Additional IPX Parameters
Option:
Figure 14-4 IPX Interface Record Example
Valid Values
Y/N
0–65535
Filter "n"
s in the IPX Filter Definitions
at the IP/LLC2/BRIDGE/IPX Interfaces Configu-
[F]
Interface Number
list the parameters for all interface types.
2
N
Ethernet
TYPE_II
4096
00000001
0
1
Y
N
8
Y
60
Y
60
Default Value
N
0
entries will be permitted or
file. (See page 14-3.)
[A], [C], [E], [E]
: . (This is merely a
0–63
from Main Menu
[A],[C],[E],[F]
14-9