Configuring Bsc Interactive Port Records - Cabletron Systems Netlink FRX4000 User Manual

Configuring BSC Interactive Port Records

Once the necessary Node, Line Processor, and protocol parameters have been con-
figured, press at the Port Configuration Menu (or
[A]
When prompted, enter:
(FRX6000 only) RLP containing the port:
(RLP numbers are described in Chapter 5.)
Port (see port locations
The display for an existing port will show the configured parameter values, while the
display for a new port will show default database values. (See
lowing figure is an example of an existing port.
BSC Interactive Port Parameters (screen 1 of 2)
* RLP: 0 Port: 5 Link State: Linkup
* I/O:–V.35
A Port Type
B Physical Port Interface
C Blocked Port Flag
D Line Speed
E Retransmission Period (ms)
F Maximum Retransmissions
G Maximum Bytes per Frame
H Generate Clock
I Rcv Clock (TT) from DTE
J BSC Type
K Activate Connection w/o poll
L Interactive Parameters - Screen 2
M Subscriber Information - Screen 3
Option:
Figure 10-1 BSC Interactive Port Record
If
BSC Type
After making any changes, be sure to press
system memory. Otherwise, the changes will not take effect until
the next re-boot of the FRX4000/6000.
Pressing lists more parameters, and pressing
[L]
lowing. (All BSC Interactive parameters are listed in
in Chapter 6):
0–7
Database
BSC Inter
V.35
N
9600 bps
2000
5
4105
Y
N
1–tpad
Y
(item J) is , item K will be
2-HPAD
from the Main Menu.
[A], [C], [A]
. (The default is
0–7
. (The default is .)
0
Table
Node Name=nodexyz
System Memory
BSC Inter
V.35
N
9600 bps
2000
5
4105
Y
N
1–tpad
Y
from Main Menu
[A],[C],[A]
Answer Non-Configured
to update the
[F7]
displays a screen similar to the fol-
[M]
Table 10-1.)
.)
0
10-1.) The fol-
.