Ipx Packet Filter Parameters - Cabletron Systems Netlink FRX4000 User Manual

Service Type Value
Server Name
Network Address Value
Node Address Value
Socket Address Value
Filter Name
14-6
is a SAP Service Type code. Some common types are:
= print queue
0003
= print server
0007
identifies a specific server whose incoming/outgoing packets will be affected by the
SAP filter.
is an IPX network number assigned to the network containing the server identified by
.
Server Name
identifies the node to which the filter will be applied.
is an IPX socket number that identifies a process or protocol. Some Novell socket
numbers are:
= NCP Process
0451
= NetBIOS Process
0455
Table 14-4 IPX Packet Filter Parameters
Parameter
Filter Name
Packet Type Value
Packet Type Mask
Destination Network Value
Destination Network Mask
Destination Node Value
Destination Node Mask
Destination Socket Value
Destination Socket Mask
Source Network Value
Source Network Mask
Source Node Value
Source Node Mask
Source Socket Value
Source Socket Mask
helps the user identify the filter. The name is not used by the software.
= file server
0004
= archive server
0009
= SAP Process
0452
= Diagnostics Process
0456
Valid Values
1–31 characters
0–ff (1 byte)
0–ff (1 byte)
(4 bytes)
0–ffffffff
(4 bytes)
0–ffffffff
0–ffffffffffff
0–ffffffffffff
0–ffff (2 bytes)
(2 bytes)
0–ffff
0–ffffffff (4 bytes)
0–ffffffff (4 bytes)
0–ffffffffffff
0–ffffffffffff
0–ffff (2 bytes)
0–ffff (2 bytes)
FRX4000/FRX6000 4.0 User Guide, Rev 01
= job server
0005
= remote bridge server
0024
= RIP Process
0453
Default Value
none
ff
ff
ffffffff
ffffffff
(6 bytes)
ffffffffffff
(6 bytes)
ffffffffffff
ffff
ffff
ffffffff
ffffffff
(6 bytes)
ffffffffffff
(6 bytes)
ffffffffffff
0451
0451