Lan Port; Lan Port Configuration Record - Cabletron Systems Netlink FRX4000 User Manual

Ntnl Use Bit "n"
IntNtnl Use Bit 0
IntNtnl Use Bit 1
CAS X1/2/3 Bit
CAS A/B/C/D Bit

LAN Port

5-6
is the setting of the national use bits in the non-frame alignment signal. National use
bits 1-5 correspond to data bits 4-8 in the non-frame alignment signal. National use
bits are reserved for use within a country. If the signal will cross an international
border, the national use bits should be Off.
is the setting of bit 0, which is transmitted as the most significant bit of the frame
alignment signal when CRC-4 is disabled.
is the setting of bit 1, which is transmitted as the most significant bit of the non-frame
alignment signal when CRC-4 is disabled.
determines whether spare bits X1, X2, and/or X3 will be used.
determines whether signaling bits A, B, C, and/or D will be used in timeslot 16 when
(Channel)
Chnl Signaling
Each FRX4000 contains a LAN port, either Ethernet or Token Ring (depending on the
model). To configure the port, press
LAN Card Configuration
* Interface Number: 0
* Type
B Locally Admin MAC Addr
C Ring Speed
Option:
Figure 5-3 LAN Port Configuration Record
Item C (
Ring Speed
is .
Associated
at the Port Configuration Menu.
[B]
Token Ring
400000000001
16 MBits/sec
[A],[C],[B]
) will not be displayed if
Node Name=nodexyz
from Main Menu
is .
Type Ethernet
FRX4000/FRX6000 4.0 User Guide, Rev 01