Cabletron Systems Netlink FRX4000 User Manual page 158

Systematic Redirection
Redirect on Busy
Redirect on Out of Order
Connection Priority
1st, 2nd,etc. Path Configured
RLP
Port
Redirection Address 0,1,etc.
9-16
See "Configuring a Hunt Group for SNA
will redirect (if ) all calls to Redirection Address 0 instead of the primary address. If
Y
that address cannot be reached and
are set to , a call will be placed to Redirection Address 1, then (if necessary) Redi-
Y
rection Address 2, and so on.
will redirect calls (if ) according to the Redirection Addresses if the current sub-
Y
scriber has no LCNs available.
will redirects calls (if
Y
subscriber's port is out of order.
prioritizes intra-nodal traffic; the higher the number, the higher the priority. (This pri-
ority has no effect on traffic exiting a node.)
Priorities are configured on all logical interfaces that use a physical frame relay port.
The device processor in the node uses these priorities to help determine the order in
which it will process protocols.
When configuring priorities, be careful to consider the types of
traffic being routed on other connections in the node.
includes or excludes the associated RLP/port as a routing path to the subscriber
device. At least one path must be specified.
is the RLP containing the port specified for the next parameter.
identify the port(s) that make up the routing path(s).
are up to five subscribers that will be called according to the specified redirection
option. The FRX4000/6000 can redirect an X.25 call to an alternate subscriber if the
original subscriber cannot be reached. (See "
.")
Order
The FRX4000/6000 will call each address in the list until one is reached. If
is enabled, the FRX4000/6000 will not call the original called subscriber,
Redirection
but will start immediately with the first subscriber in the redirection list.
Redirect on Busy
) according to the Redirection Addresses if the if the current
Redirect on Busy
Subscribers" on page 9-17.
and/or
Redirect on Out of Order
" and "
Redirect on Out of
FRX4000/FRX6000 4.0 User Guide, Rev 01
Systematic