Configuring Bsc Batch Port Records; Bsc Batch Port Record - Cabletron Systems Netlink FRX4000 User Manual

Configuring BSC Batch Port Records

11-2
Once the necessary Node, Line Processor, and protocol parameters have been con-
figured, press at the Port Configuration Menu (or
[A]
When prompted, enter:
(FRX6000 only) RLP containing the port:
(RLP numbers are described in Chapter 5.)
Port (see port locations
The display for an existing port will show the configured parameter values, while the
display for a new port will show default database values. (See
lowing figure is an example of an existing port.
BSC Batch Port Parameters (screen 1 of 2)
* RLP: 0 Port: 5 Link State: Linkup
* I/O: V.35
A Port Type
B Physical Port Interface
C Blocked Port Flag
D Line Speed
E Retransmission Period (ms)
F Maximum Retransmissions
G Maximum Bytes per Frame
H Generate Clock
I Rcv Clock (TT) from DTE
J Batch Parameters - Screen 2
K Subscriber Information - Screen 3
L On-Line System Memory Changes
Option:
Figure 11-1 BSC Batch Port Record
After making any changes, be sure to press
system memory. Otherwise, the changes will not take effect until
the next re-boot of the FRX4000/6000.
Pressing lists more parameters, and pressing
[J]
lowing. (All BSC Batch parameters are listed in
[A], [C], [A]
. (The default is
0–7
in Chapter 6): . (The default is
0–7
Database System Memory
BSC Batch BSC Batch
V.35 V.35
N N
9600 bps 9600 bps
2000 2000
5 5
4105 4105
Y Y
N N
Y
displays a screen similar to the fol-
[K]
Table
FRX4000/FRX6000 4.0 User Guide, Rev 01
from the Main Menu.
.)
0
.)
0
Table 11-1.) The fol-
Node Name=nodexyz
from Main Menu
[A],[C],[A]
to update the
[F7]
11-1.)