Cabletron Systems Netlink FRX4000 User Manual page 370

21-26
644.
Fr RLP/PORT/DLCI Mismatch
Severity: 3
Meaning: A mismatch has occurred between the current configuration and the
requested RLP/Port/DLCI when configuring a frame relay based IP
or IPX interface.
Action: Change the requested RLP/Port/DLCI.
650.
Receive Loss of Sync condition Set
Severity: 2
Meaning: Self-explanatory.
Action: Check the T1/E1 cable at the local end of the connection. If it is
securely connected and everything else appears operational, contact
your carrier.
651.
Receive Carrier Loss condition Set
Severity: 2
Meaning: Self-explanatory.
Action: Check the T1/E1 cable at the local end of the connection. If it is
securely connected and everything else appears operational, contact
your carrier.
652.
Receive Remote Alarm condition set
Severity: 2
Meaning: The remote device is not receiving the signal from the local device.
Action: Check the T1/E1 cable at the local end of the connection. If it is
securely connected and everything else appears operational, contact
your carrier.
653.
Receive Loss of Sync condition Cleared
Severity: 4
Meaning: The situation that caused event 650 has been fixed. However, the
T1/E1 connection will not be operational if any of events 650-652
has been set but not cleared.
654.
ReceiveCarrier Loss condition Cleared
Severity: 4
Meaning: The situation that caused event 651 has been fixed. However, the
T1/E1 connection will not be operational if any of events 650-652
has been set but not cleared.
655.
Receive Remote Alarm condition Cleared
Severity: 4
Meaning: The situation that caused event 652 has been fixed. However, the
T1/E1 connection will not be operational if any of events 650-652
has been set but not cleared.
FRX4000/FRX6000 4.0 User Guide, Rev 01