Cabletron Systems Netlink FRX4000 User Manual page 199

Profile Description
01, PAD Recall
02, Echo
03, Data Forwarding Char
Configuring Async Ports
Table 12-1 Async PAD Profile Parameters
Parameter
13, Insert <lf> after <cr>
14, Padding after <lf>
15, Editing
16, Character Delete
17, Line Delete
18, Line Display
19, Edit Service Signal
20, Echo Mask
21, Parity
22, Page Wait
The numbers preceding the parameter names correspond to CCITT
X.3. Also, the default values make up CCITT profile 90.
When specifying characters that will perform functions (i.e.,
Data Forwarding
as different characters
is used simply as an identifier. It is not an X.3 parameter.
allows the user's device to initiate an escape from data transfer or connection in
progress state in order to send PAD command signals. Values (can be added) are:
= escape is not allowed.
0
= escape will be initiated by
1
= escape will be initiated by the character defined by this number.
32–126
provides for characters received from the user's device to be transmitted back to the
device as well as being interpreted by the PAD.
allows the selection of defined sets of characters received from the user's device to be
recognized by the PAD as an indication to complete the assembly and forward a com-
plete packet sequence as defined in Recommendation X.25. Values (can be added)
are:
= no data forwarding character.
0
= alphanumeric characters (A-Z, a-z, 0-9).
1
= ESC, BEL, ENQ, or ACK.
4
= DEL, CAN, or DC2.
8
= ETX or EOT.
16
= HT, LF, VT, or FF.
32
= all characters in columns 0 & 1 of International Alphabet #5 that are not
64
included above. (The contents of columns 0 & 1 are equivalent to ASCII
characters NUL through US in the table in
= all characters.
127
Valid Values
0–7
(characters)
0–255
(no) / (yes)
0 1
0–127
0–127
0–127
0–126
0–255
0–3
0–255 (linefeeds)
or ), be sure to specify these
Character Delete
( ),
[Ctrl] [P] 1/0 Data Link Escape
Appendix
(continued)
Default Value
0
0
0
127
24
18
1
0
0
0
.
D.)
12-3