Hot Links Master Configuration - Lenovo RackSwitch G8264 Command Reference Manual

Hot Links Master Configuration

© Copyright Lenovo 2017
Use the following commands to configure the Hot Links Master interface.
Table 255. Hot Links Master Configuration Options
Command Syntax and Usage
hotlinks trigger <1‐200> master adminkey <1‐65535>
Adds an LACP admin key to the Master interface. LACP Link Aggregation
Groups (LAGs) formed with this admin key will be included in the Master
interface.
Command mode: Global configuration
no hotlinks trigger <1‐200> master adminkey
Clears all LACP admin keys on the Master interface.
Command mode: Global configuration
hotlinks trigger <1‐200> master port <port alias or number>
Adds the selected port to the Hot Links Master interface.
Command mode: Global configuration
no hotlinks trigger <1‐200> master port
Clears all ports added to the Hot Links Master interface.
Command mode: Global configuration
hotlinks trigger <1‐200> master portchannel <1‐64>
Adds the selected LAG to the Hot Links Master interface.
Command mode: Global configuration
no hotlinks trigger <1‐200> master portchannel
Clears all LAGs added to the Hot Links Master interface.
Command mode: Global configuration
show hotlinks trigger <1‐200>
Displays the current Hot Links trigger settings.
Command mode: All
Chapter 4: Configuration Commands
499