© Copyright Lenovo 2017
Table 158.
SNMPv3 Configuration Options (continued)
snmpserver targetparameters <1‐16>
This command allows you to configure SNMP parameters, consisting of
message processing model, security model, security level, and security name
information. There may be multiple transport endpoints associated with a
particular set of SNMP parameters, or a particular transport endpoint may be
associated with several sets of SNMP parameters. To view command options,
see page
384.
Command mode: Global configuration
snmpserver user <1‐17>
This command allows you to create a user security model (USM) entry for an
authorized user. You can also configure this entry through SNMP. To view
command options, see page
Command mode: Global configuration
snmpserver view <1‐128>
This command allows you to create different MIB views. To view command
options, see page
379.
Command mode: Global configuration
show snmpserver v3
Displays the current SNMPv3 configuration.
Command mode: All
378.
Chapter 4: Configuration Commands
377