Ipv6 Static Route Configuration; Ipv6 Neighbor Discovery Cache Configuration - Lenovo RackSwitch G8264 Command Reference Manual

IPv6 Static Route Configuration

IPv6 Neighbor Discovery Cache Configuration

620
G8264 Command Reference for ENOS 8.4
The following table describes the IPv6 static route configuration commands.
Table 344.
IPv6 Static Route Configuration Options
Command Syntax and Usage
ip route6 <IPv6 address> <IPv6 prefix length> <IPv6 gateway address>
[<interface number (1‐126)>]
Adds an IPv6 static route.
Command mode: Global configuration
no ip route6 <IPv6 address> <IPv6 prefix length> [<IP interface number>]
Removes the selected route.
Command mode: Global configuration
no ip route6 [destination­address <IPv6 address>|gateway
<default IPv6 gateway address>|interface <IP interface number>|all]
Clears the selected IPv6 static routes.
Command mode: Global configuration
show ipv6 route static
Displays the current static route configuration.
Command mode: All
The following table describes the IPv6 Neighbor Discovery cache configuration
commands.
Table 345.
IPv6 Neighbor Discovery Cache Configuration Options
Command Syntax and Usage
ip neighbors <IPv6 address> <MAC address> vlan <VLAN ID (1‐4094)>
port <port number or alias>
Adds a static entry to the Neighbor Discovery cache table.
Command mode: Global configuration
no ip neighbors <IPv6 address>
Deletes the selected entry from the static Neighbor Discovery cache table.
Command mode: Global configuration
no ip neighbors all [ip <IP interface number>|interface port
<port alias or number>|vlan <VLAN ID (1‐4094)>]
Clears the selected static entries in the Neighbor Discovery cache table.
Command mode: Global configuration