VMware Distributed Virtual Switch Operations
690
G8264 Command Reference for ENOS 8.4
Use these commands to administer a VMware Distributed Virtual Switch
(dvSwitch).
Table 391. VMware dvSwitch Operations (/oper/virt/vmware/dvswitch)
Command Syntax and Usage
virt vmware dvswitch add <datacenter name> <dvSwitch name>
[<dvSwitch version>]
Adds the specified dvSwitch to the specified DataCenter.
Command Mode: All
virt vmware dvswitch addhost <dvSwitch name> {<host UUID|
|host IP address|host name>}
Adds the specified host to the specified dvSwitch. Use one of the following
identifiers to specify the host:
UUID
IP address
Host name
Command Mode: All
virt vmware dvswitch adduplink <dvSwitch name> {<host UUID|
|host IP address|host name>} <uplink name>
Adds the specified physical NIC to the specified dvSwitch uplink ports.
Command Mode: All
virt vmware dvswitch del <datacenter name> <dvSwitch name>
Removes the specified dvSwitch from the specified DataCenter.
Command Mode: All
virt vmware dvswitch remhost <dvSwitch name> {<host UUID|
|host IP address|host name>}
Removes the specified host from the specified dvSwitch. Use one of the
following identifiers to specify the host:
UUID
IP address
Host name
Command Mode: All
virt vmware dvswitch remuplink <dvSwitch name> {<host UUID|
|host IP address|host name>} <uplink name>
Removes the specified physical NIC from the specified dvSwitch uplink ports.
Command Mode: All