TFTP, SFTP, or FTP System Dump Copy
742
G8264 Command Reference for ENOS 8.4
Use these commands to copy (save) the system dump to a TFTP, SFTP or FTP
server.
Note: If the TFTP/FTP server is running SunOS or the Solaris operating system, the
specified file must exist prior to executing the copy flashdump tftp command
(or copy flashdump sftp) and must be writable (set with proper permission
and not locked by any application). The contents of the specified file will be
replaced with the current dump data.
To save dump information via TFTP, enter:
RS G8264# copy flashdump tftp <server filename>
You are prompted for the TFTP server IP address or hostname, and the filename of
the target dump file.
To save dump information via SFTP, enter:
RS G8264# copy flashdump sftp <server filename>
You are prompted for the SFTP server IP address or hostname, and the filename of
the target dump file.
To save dump information via FTP, enter:
RS G8264# copy flashdump ftp <server filename>
You are prompted for the FTP server IPv4 address or hostname, your username and
password, and the filename of the target dump file.