Lenovo RackSwitch G8264 Command Reference Manual page 493

© Copyright Lenovo 2017
Table 248.
LACP Port Options
Command Syntax and Usage
lacp priority <1‐65535>
Sets the priority value for the selected port. Lower numbers provide higher
priority.
The default value is 32768.
Command mode: Interface port/Interface portchannel
default lacp priority
Resets the priority value for the port to its default value of 32768.
Command mode: Interface port/Interface portchannel
lacp suspend­individual
Sets the port in LACP suspended state if it does not receive LACPDUs
anymore.
Note: The default value is suspended for all switch ports.
Command mode: Interface port/Interface portchannel
no lacp suspend­individual
Sets the port in LACP individual state if it does not receive LACPDUs
anymore.
Command mode: Interface port/Interface portchannel
default lacp suspend­individual
Resets the LACP state of the port to its default value.
Command mode: Interface port/Interface portchannel
default lacp
Resets the LACP port configuration to its default values.
Command mode: Interface port/Interface portchannel
port­channel min­links <1‐32>
Set the minimum number of links for the LACP LAG to which this port
belongs. If the specified minimum number of ports are not available, the LAG
is placed in the down state.
Command mode: Interface port/Interface portchannel
default port­channel min­links
Restores the minimum number of links for this port to its default value.
Command mode: Interface port/Interface portchannel
show interface port <port alias or number> lacp
Displays the current LACP configuration for this port.
Command mode: All
Chapter 4: Configuration Commands
493