Lenovo RackSwitch G8264 Command Reference Manual page 421

© Copyright Lenovo 2017
Table 193.
Control Plane Protection Options (continued)
Command Syntax and Usage
no qos protocol­packet­control packet­queue­map <packet type>
Clears the selected packet type from its associated packet queue.
Command mode: Global configuration
qos protocol­packet­control rate­limit­packet­queue
<packet queue number (0‐47)> <1‐10000>
Configures the number of packets per second allowed for each packet queue.
Command mode: Global configuration
no qos protocol­packet­control rate­limit­packet­queue
<packet queue number (0‐47)>
Clears the packet rate configured for the selected packet queue.
Command mode: Global configuration
show qos protocol­packet­control information protocol
Displays of mapping of protocol packet types to each packet queue number.
The status indicates whether the protocol is running or not running.
Command mode: All
show qos protocol­packet­control information queue
Displays the packet rate configured for each packet queue.
Command mode: All
Chapter 4: Configuration Commands
421