Snmpv3 Group Configuration - Lenovo RackSwitch G8264 Command Reference Manual

SNMPv3 Group Configuration

© Copyright Lenovo 2017
Table 161.
View‐based Access Control Model Options (continued)
Command Syntax and Usage
no snmp­server access <1‐32>
Deletes the View‐based Access Control entry.
Command mode: Global configuration
show snmp­server v3 access <1‐32>
Displays the View‐based Access Control configuration.
Command mode: All
The following table describes the SNMPv3 Group commands.
Table 162.
SNMPv3 Group Configuration Options
Command Syntax and Usage
snmp­server group <1‐17> group­name <1‐32 characters>
The name for the access group as defined in the following command:
snmp­server access <1‐32> name <1‐32 characters> on page
Command mode: Global configuration
snmp­server group <1‐17> security {usm|snmpv1|snmpv2}
Defines the security model.
Command mode: Global configuration
snmp­server group <1‐17> user­name <1‐32 characters>
Sets the user name as defined in the following command:
snmp­server user <1‐17> name <1‐32 characters> on page
Command mode: Global configuration
no snmp­server group <1‐17>
Deletes the vacmSecurityToGroup entry.
Command mode: Global configuration
show snmp­server v3 group <1‐17>
Displays the current vacmSecurityToGroup configuration.
Command mode: All
378.
378.
Chapter 4: Configuration Commands
381