Ecmp Static Route Information - Lenovo RackSwitch G8264 Command Reference Manual

ECMP Static Route Information

© Copyright Lenovo 2017
The following command displays Equal Cost Multi‐Path (ECMP) route
information:
show ip ecmp
Command mode: All
Current ecmp static routes:
Destination Mask Gateway If GW Status
­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­ ­­­­ ­­­­­­­­­­­
10.10.1.1 255.255.255.255 100.10.1.1 1 up
200.20.2.2 1 down
10.20.2.2 255.255.255.255 10.233.3.3 1 up
10.20.2.2 255.255.255.255 10.234.4.4 1 up
10.20.2.2 255.255.255.255 10.235.5.5 1 up
ECMP health­check ping interval: 1
ECMP health­check retries number: 3
ECMP Hash Mechanism: dipsip
ECMP route information shows the status of each ECMP route configured on the
switch.
Chapter 2: Information Commands
119