Lenovo RackSwitch G8264 Command Reference Manual page 768

768
G8264 Command Reference for ENOS 8.4
Thread LOG_WARNING Message (continued)
CFG Switch cannot support more than 16 protocols simultaneously!
CFG Trunk hash changed, Dataplane L3 hash includes configured
Trunk hash and ECMP hash
CFG Unfit config exists when protocol‐vlan apply.
DCBX Feature ʺ{DCBX|ETS|PFC|App Proto|VNIC|ETS}ʺ not
supported by peer on port <port>
ETS ETS prohibits a PG comprising of PFC and non‐PFC traffic.
Mixing in the same PG different PFC settings may affect the
switch functionality.
HOTLINKS ʺErrorʺ is set to ʺStandby|Activeʺ
HOTLINKS ʺLearningʺ is set to ʺStandby|Activeʺ
HOTLINKS ʺNoneʺ is set to ʺStandby|Activeʺ
HOTLINKS ʺSide Maxʺ is set to ʺStandby|Activeʺ
HOTLINKS has no ʺ{Side Max|None|Learning|Error}ʺ interface
IP <IP address> configured as V<version> and received IGMP V{1|2}
query
IP IGMP: Switch Querier {disabled|enabled} on VLAN <VLAN>
IP IGMP: Switch {became|is no longer} a Querier for VLAN <VLAN>
IP IGMP: Switch is [not] elected as Querier for VLAN <VLAN>
IP IGMP: Switch Querier election process started for VLAN <VLAN>
IP IGMP: Switch Querier election type changed for VLAN <VLAN>
IP IGMP: Warning Querier Source‐IP is not configured on VLAN
<VLAN> Queries with Source‐IP Zero may be ignored in Querier
election process.
IP IGMP: Warning Snooping is not enabled on VLAN <VLAN>,
Querier configured only to send queries.
IP New Multicast router learned on <IP address>, VLAN <VLAN>,
Version {V1|V2|V3}
LLDP ERROR!!! The request port item <item> is invalid
NTP cannot contact NTP server <IP address> ‐ {Mgmt|Ext‐mgt} port
unavailable
NTP cannot contact [primary|secondary] NTP server <IP address>
SYSTEM I2C device <ID> <description> set to access state <state> [from CLI]
SYSTEM Interface <interface> failed to renew DHCP Lease.
TEAMING error, action is undefined