OSPFv3 Redistribute Entry Configuration
© Copyright Lenovo 2017
The following table describes the OSPFv3 Redistribute Entry commands.
Table 297.
OSPFv3 Redist Entry Configuration Options
Command Syntax and Usage
redistconfig <1‐128> address <IPv6 address> <IPv6 prefix length (1‐128)>
Configures the base IPv6 address and the subnet prefix length for the
redistribution entry.
Command mode: Router OSPF3
[no] redistconfig <1‐128> enable
Enables or disables the OSPFv3 redistribution entry.
Command mode: Router OSPF3
redistconfig <1‐128> metrictype {asExttype1|asExttype2}
Configures the metric type applied to the route before it is advertised into the
OSPFv3 domain.
Command mode: Router OSPF3
redistconfig <1‐128> metricvalue <1‐16777215>
Configures the route metric value applied to the route before it is advertised
into the OSPFv3 domain.
Command mode: Router OSPF3
redistconfig <1‐128> tag <0‐4294967295>
Configures the route tag.
Command mode: Router OSPF3
no redistconfig <1‐128> tag
Removes the route tag.
Command mode: Router OSPF3
no redistconfig <1‐128>
Deletes the OSPFv3 redistribution entry.
Command mode: Router OSPF3
show ipv6 ospf redistconfig <1‐128>
Displays the current OSPFv3 redistribution configuration for the specified
entry.
Command mode: All
Chapter 4: Configuration Commands
559