IPv6 Filtering Configuration
436
G8264 Command Reference for ENOS 8.4
These commands allow you to define IPv6 matching criteria for an ACL.
Table 208.
IP version 6 Filtering Options
Command Syntax and Usage
accesscontrol list6 <1‐128> ipv6 destinationaddress
<IPv6 address> [<prefix length (1‐128)>]
Defines a destination IPv6 address for the ACL. If defined, traffic with this
destination address will match this ACL.
Command mode: Global configuration
no accesscontrol list6 <1‐128> ipv6 destinationaddress
Deletes the configured destination IPv6 address for the specified ACL.
Command mode: Global configuration
accesscontrol list6 <1‐128> ipv6 flowlabel <0‐1048575>
Defines the flow label for the ACL. If defined, traffic with this flow label will
match this ACL.
Command mode: Global configuration
no accesscontrol list6 <1‐128> ipv6 flowlabel
Deletes the configured flow label for the specified ACL.
Command mode: Global configuration
accesscontrol list6 <1‐128> ipv6 nextheader <0‐255>
Defines the next header value for the ACL. If defined, traffic with this next
header value will match this ACL.
Command mode: Global configuration
no accesscontrol list6 <1‐128> ipv6 nextheader
Deletes the configured next header for the specified ACL.
Command mode: Global configuration
accesscontrol list6 <1‐128> ipv6 sourceaddress
<IPv6 address> [<prefix length (1‐128)>]
Defines a source IPv6 address for the ACL. If defined, traffic with this source
address will match this ACL.
Command mode: Global configuration
no accesscontrol list6 <1‐128> ipv6 sourceaddress
Deletes the configured source IPv6 address for the specified ACL.
Command mode: Global configuration
accesscontrol list6 <1‐128> ipv6 trafficclass <0‐255>
Defines the traffic class for the ACL. If defined, traffic with this traffic class will
match this ACL.
Command mode: Global configuration