IPsec Configuration
IPsec Transform Set Configuration
592
G8264 Command Reference for ENOS 8.4
The following table describes the commands used to configure IPsec.
Table 322.
IPsec Options
Command Syntax and Usage
[no] ipsec enable
Enables or disables IPsec.
Command mode: Global configuration
show ipsec
Displays the current IPsec settings.
Command mode: All
The following table describes the commands used to configure IPsec transforms.
Table 323.
IPsec Transform Set Options
Command Syntax and Usage
ipsec transformset <1‐10> {ahsha1|esp3des|espaescbc|
|espnull|espsha1}
Sets the AH or ESP authentication, encryption, or integrity algorithm. The
available algorithms are as follows:
ahsha1
esp3des
espaescbc
espnull
espsha1
Command mode: Global configuration
ipsec transformset <1‐10> transport {ahsha1|esp3des|
|espaescbc|espnull|espsha1}
Sets transport mode and the AH or ESP authentication, encryption, or
integrity algorithm.
Command mode: Global configuration
ipsec transformset <1‐10> tunnel {ahsha1|esp3des|
|espaescbc|espnull|espsha1}
Sets tunnel mode and the AH or ESP authentication, encryption, or integrity
algorithm.
Command mode: Global configuration