Fdb Multicast Information - Lenovo RackSwitch G8264 Command Reference Manual

FDB Multicast Information

© Copyright Lenovo 2017
Table 22.
FDB Information Options (continued)
Command Syntax and Usage
show mac­address­table state {unknown|forward|trunk}
Displays all FDB entries for a particular state.
Command mode: All
show mac­address­table static
Displays all static unicast MAC entries in the FDB.
Command mode: All
show mac­address­table vlan <VLAN ID (1‐4094)>
Displays all FDB entries on a single VLAN.
Command mode: All
The following commands display FDB multicast information.
Table 23.
Multicast FDB Information Options
Command Syntax and Usage
show mac­address­table multicast
Displays all Multicast MAC entries in the FDB.
Command mode: All
show mac­address­table multicast address <MAC address>
Displays a single multicast entry by its MAC address. You are prompted to
enter the MAC address of the device. Enter the MAC address using the format,
xx:xx:xx:xx:xx:xx. For example, 08:00:20:12:34:56.
You can also enter the MAC address using the format, xxxxxxxxxxxx.
For example, 080020123456.
Command mode: All
show mac­address­table multicast interface port
<port alias or number>
Displays all multicast entries for a particular port.
Command mode: All
show mac­address­table multicast vlan <VLAN ID (1‐4094)>
Displays all multicast entries on a single VLAN.
Command mode: All
Chapter 2: Information Commands
61