Layer 2 Link Aggregation Group (Lag) Hash - Lenovo RackSwitch G8264 Command Reference Manual

Layer 2 Link Aggregation Group (LAG) Hash

© Copyright Lenovo 2017
Layer 2 Link Aggregation Group (LAG) hash parameters are set globally. You can
enable one or both parameters, to configure any of the following valid
combinations:
 SMAC (source MAC only)
 DMAC (destination MAC only)
 SMAC and DMAC
Use the following commands to configure Layer 2 LAG hash parameters for the
switch.
Table 242.
Layer 2 LAG Hash Options
Command Syntax and Usage
portchannel thash l2thash l2­destination­mac­address
Enables Layer 2 LAG hashing on the destination MAC.
Command mode: Global configuration
portchannel thash l2thash l2­source­mac­address
Enables Layer 2 LAG hashing on the source MAC.
Command mode: Global configuration
portchannel thash l2thash l2­source­destination­mac
Enables Layer 2 LAG hashing on both the source and destination MAC.
Command mode: Global configuration
show portchannel hash
Displays the current LAG hash settings.
Command mode: All
Chapter 4: Configuration Commands
485