Lenovo RackSwitch G8264 Command Reference Manual page 438

438
G8264 Command Reference for ENOS 8.4
Table 209.
IPv6 ACL TCP/UDP Filtering Options
Command Syntax and Usage
access­control list6 <1‐128> tcp­udp destination­port
<destination port number (1‐65535)> [<mask (0xFFFF)>]
Defines a destination port for the ACL. If defined, traffic with the specified
TCP or UDP destination port will match this ACL. Specify the port number,
just as with source­port above.
Command mode: Global configuration
no access­control list6 <1‐128> tcp­udp destination­port
Deletes the configured IPv6 destination‐port for the specified ACL.
Command mode: Global configuration
access­control list6 <1‐128> tcp­udp flags <value (0x0‐0x3f)>
[<mask (0x0‐0x3f)>]
Defines a TCP/UDP flag for the ACL.
Command mode: Global configuration
no access­control list6 <1‐128> tcp­udp flags
Deletes the configured TCP/UDP flag for the specified ACL.
Command mode: Global configuration
default access­control list6 <1‐128> tcp­udp
Resets the TCP/UDP parameters for the ACL to their default values.
Command mode: Global configuration
show access­control list6 <1‐128> tcp­udp
Displays the current TCP/UDP Filtering parameters.
Command mode: All