OSPF Route Redistribution Configuration
OSPF MD5 Key Configuration
© Copyright Lenovo 2017
The following table describes the OSPF Route Redistribution commands.
Table 286.
OSPF Route Redistribution Configuration Options
Command Syntax and Usage
[no] redistribute {fixed|static|rip|ebgp|ibgp} <1‐255>
Adds or removes selected routing map to the rmap list.
This option adds a route map to the route redistribution list. The routes of the
redistribution protocol matched by the route maps in the route redistribution
list will be redistributed.
Command mode: Router OSPF
redistribute {fixed|static|rip|ebgp|ibgp} export
<metric (1‐16777214)> <AS external metric type (1‐2)>
Exports the routes of this protocol as external OSPF AS‐external LSAs in which
the metric and metric type are specified.
Command mode: Router OSPF
no redistribute {fixed|static|rip|ebgp|ibgp} export
Stops exporting the routes of the protocol.
Command mode: Router OSPF
show ip ospf redistribute
Displays the current route map settings.
Command mode: All
The following table describes the OSPF MD5 Key commands.
Table 287.
OSPF MD5 Key Options
Command Syntax and Usage
messagedigestkey <1‐255> md5key <1‐16 characters>
Sets the authentication key for this OSPF packet.
Command mode: Router OSPF
no messagedigestkey <1‐255>
Deletes the authentication key for this OSPF packet.
Command mode: Router OSPF
show ip ospf messagedigestkey <1‐255>
Displays the current MD5 key configuration.
Command mode: All
Chapter 4: Configuration Commands
543