Restoring The Active Switch Configuration - Lenovo RackSwitch G8264 Command Reference Manual

Restoring the Active Switch Configuration

© Copyright Lenovo 2017
When the copy running­config command is used, the active configuration
will be replaced with the commands found in the specified configuration file. The
file can contain a full switch configuration or a partial switch configuration.
To start the switch configuration download, at the prompt, enter:
RS G8264# copy ftp running­config
or:
RS G8264# copy sftp running­config
or:
RS G8264# copy tftp running­config
The switch prompts you for the server address and filename.
Chapter 4: Configuration Commands
677