360
G8264 Command Reference for ENOS 8.4
Table 154.
TACACS+ Server Configuration Options (continued)
Command Syntax and Usage
[no] tacacsserver passwordchange
Enables or disables TACACS+ password change.
The default value is disabled.
Command mode: Global configuration
tacacsserver port <TCP port number (1‐65000)>
Enter the number of the TCP port to be configured.
The default is 49.
Command mode: Global configuration
default tacacsserver port
Resets the TACACS+ server port to the default port number ‐ 49.
Command mode: Global configuration
tacacsserver primaryhost {<hostname>|<IP address>} key
<1‐32 characters>
Sets the primary TACACS+ server address and the shared secret between the
switch and the TACACS+ server(s).
Command mode: Global configuration
tacacsserver primaryhost {dataport|mgtport}
Defines the primary interface port to use to send TACACS+ server requests.
Select the port to use for data transfer.
Command mode: Global configuration
no tacacsserver primaryhost [key]
Deletes the primary TACACS+ server. The key option only removes the
shared secret between the switch and the TACACS+ server.
Command mode: Global configuration
[no] tacacsserver privilegemapping
Enables or disables TACACS+ privilege‐level mapping.
The default value is disabled.
Command mode: Global configuration
tacacsserver retransmit <1‐3>
Sets the number of failed authentication requests before switching to a
different TACACS+ server.
The default is 3 requests.
Command mode: Global configuration