Failover Manual Monitor Port Configuration
© Copyright Lenovo 2017
Use these commands to define the port link(s) to monitor. The Manual Monitor
Port configuration accepts any non‐management port.
Table 251. Failover Manual Monitor Port Options
Command Syntax and Usage
[no] failover trigger <1‐8> mmon monitor adminkey <1‐65535>
Adds or removes an LACP admin key to the Manual Monitor Port
configuration. LACP Link Aggregation Groups (LAGs) formed with this
admin key will be included in the Manual Monitor Port configuration.
Command mode: Global configuration
[no] failover trigger <1‐8> mmon monitor member
<port alias or number>
Adds or removes the selected port to the Manual Monitor Port configuration.
Command mode: Global configuration
[no] failover trigger <1‐8> mmon monitor portchannel <1‐64>
Adds or removes the selected LAG to the Manual Monitor Port configuration.
Command mode: Global configuration
show failover trigger <1‐8>
Displays the current Failover settings.
Command mode: All
Chapter 4: Configuration Commands
495