Arp Cache Maintenance - Lenovo RackSwitch G8264 Command Reference Manual

ARP Cache Maintenance

© Copyright Lenovo 2017
The following table describes the ARP cache maintenance commands.
Table 412.
Address Resolution Protocol Maintenance Options
Command Syntax and Usage
show [ip] arp
Shows all ARP entries.
Command mode: All
show [ip] arp find <IP address>
Shows a single ARP entry by IP address.
Command mode: All
show [ip] arp interface port <port number or alias>
Shows ARP entries on selected ports.
Command mode: All
show [ip] arp reply
Shows the list of IP addresses which the switch will respond to for ARP
requests.
Command mode: All
show [ip] arp vlan <VLAN ID (1‐4094)>
Shows ARP entries on a single VLAN.
Command mode: All
clear arp
Clears the entire ARP list from switch memory.
Command mode: Privileged EXEC
Note: To display all or a portion of ARP entries currently held in the switch, you
can also refer to "ARP Information" on page 94.
Chapter 7: Maintenance Commands
735