Pim Information - Lenovo RackSwitch G8264 Command Reference Manual

PIM Information

© Copyright Lenovo 2017
The following commands display PIM information:
Table 59.
PIM Information Options
Command Syntax and Usage
show ip pim bsr [<component ID (1‐2)>]
Displays information about the PIM bootstrap router (BSR).
Command mode: All
show ip pim component [<component ID (1‐2)>]
Displays PIM component information. For details, see page
Command mode: All
show ip pim elected­rp [group <multicast group IP address>]
Displays a list of the elected Rendezvous Points.
Command mode: All
show ip pim interface [<1‐126>|detail|loopback <1‐5>|port
<port alias or number>]
Displays PIM interface information. To view sample output, see page
Command mode: All
show ip pim mroute
Displays information about PIM multicast routes. For more information about
displaying PIM multicast route information, see page
Command mode: All
show ip pim neighbor [<interface number>|port <port alias or number>]
Displays PIM neighbor information. To view sample output, see page
Command mode: All
show ip pim neighbor­filters
Displays information about PIM neighbor filters.
Command mode: All
show ip pim rp­candidate [<component ID (1‐2)>]
Displays a list of the candidate Rendezvous Points configured.
Command mode: All
show ip pim rp­set [<RP IP address>]
Displays a list of the Rendezvous Points learned.
Command mode: All
show ip pim rp­static [<component ID (1‐2)>]
Displays a list of the static Rendezvous Points configured.
Command mode: All
140.
142.
Chapter 2: Information Commands
140.
141.
139