© Copyright Lenovo 2017
Table 133.
OpenFlow Statistics
Parameter
Bad‐Flags
Group‐Mod‐Failed
Group‐Exists
Invalid‐Group
Weight‐
Unsupported
Out‐of‐Groups
Out‐of‐Buckets
Chaining‐
Unsupported
Watch‐Unsupported Count of error message sent to Controller due to
Loop
Unknown‐Group
Chained‐Group
Bad‐Type
Bad‐Command
Bad‐Bucket
Bad‐Watch
Permission‐Error
Description
Count of error messages sent when the specified flags in
the flow_mod message are unsupported. Available only in
OpenFlow 1.3.
Available only in OpenFlow 1.3
Count of error message sent to Controller due to already
existing group. Available only in OpenFlow 1.3.
Count of error message sent to Controller due to invalid
group. Available only in OpenFlow 1.3.
Count of error message sent to Controller due to
unsupported "weight" parameter. Available only in
OpenFlow 1.3.
Count of error message sent to Controller due to full group
table. Available only in OpenFlow 1.3.
Count of error message sent to Controller due to full
bucket count per group. Available only in OpenFlow 1.3.
Count of error message sent to Controller due to
unsupported groups that forward to groups. Available
only in OpenFlow 1.3.
unsupported "watch" parameter. Available only in
OpenFlow 1.3.
Count of error message sent to Controller due to
unsupported checking that no loop is created while
chaining groups. Available only in OpenFlow 1.3.
Count of error message sent to Controller due to
unsupported group type. Available only in OpenFlow 1.3.
Count of error message sent to Controller due to
unsupported groups that forward to groups. Available
only in OpenFlow 1.3.
Count of error message sent to Controller due to wrong
group type. Available only in OpenFlow 1.3.
Count of error message sent to Controller due to
unsupported command. Available only in OpenFlow 1.3.
Count of error message sent to Controller due to error in
bucket. Available only in OpenFlow 1.3.
Count of error message sent to Controller due to error in
watch group. Available only in OpenFlow 1.3.
Count of error message sent to Controller due permission
error. Available only in OpenFlow 1.3.
Chapter 3: Statistics Commands
303