Port OAM Configuration
410
G8264 Command Reference for ENOS 8.4
Operation, Administration, and Maintenance (OAM) protocol allows the switch to
detect faults on the physical port links. OAM is described in the IEEE 802.3ah
standard. OAM Discovery commands are described in the following table.
Table 184.
Port OAM Configuration Options
Command Syntax and Usage
[no] oam
Enables or disables OAM discovery on the current port.
Command mode: Interface port
[no] oam passive
Enables or disables OAM discovery passive mode. In passive mode, the
current port allows its peer link to initiate OAM discovery. If OAM determines
that the port is in an anomalous condition, the port is disabled.
Command mode: Interface port
show interface port <port alias or number> oam
Displays the specified port's OAM parameters.
Command mode: All