Lenovo RackSwitch G8264 Command Reference Manual page 342

342
G8264 Command Reference for ENOS 8.4
Table 148.
System Configuration Options (continued)
Command Syntax and Usage
hostname <1‐64 characters>
Enables displaying of the host name (system administrator's name) in the
Command Line Interface (CLI).
Command mode: Global configuration
no hostname
Deletes the host name set by the system administrator and displays the default
system host name in the CLI.
Command mode: Global configuration
line console length <0‐300>
Configures the number of lines per screen displayed in the CLI by default for
console sessions. Setting it to 0 disables paging.
The default value is 28.
Command mode: Global configuration
no line console
Sets line console length to the default value of 28.
Command mode: Global configuration
line vty length <0‐300>
Sets the default number of lines per screen displayed for Telnet and SSH
sessions. A value of 0 disables paging.
The default value is 28.
Command mode: Global configuration
no line vty
Sets line vty length to the default value of 28.
Command mode: Global configuration
[no] prompting
Enables or disables CLI confirmation prompts.
By default, this settings is enabled.
Note: When disabled, the switch will choose the default answer.
Command mode: Global configuration
[no] system bootp
Enables or disables the use of the Bootstrap Protocol (BOOTP). If you enable
BOOTP, the switch will query its BOOTP server for all of the switch IP
parameters. For more details, see page
The default setting is enabled.
Command mode: Global configuration
599.