56
G8264 Command Reference for ENOS 8.4
Table 20.
Layer 2 Information Commands (continued)
Command Syntax and Usage
show spanningtree
Displays Spanning Tree information, including the status (on or off), Spanning
Tree mode (RSTP, PVRST, or MSTP) and VLAN membership.
In addition to seeing if STG is enabled or disabled, you can view the following
STG bridge information:
Priority
Hello interval
Maximum age value
Forwarding delay
Aging time
You can also see the following port‐specific STG information:
Port alias and priority
Cost
State
For details, see page
Command mode: All
show spanningtree blockedports
Lists the ports blocked by each STP instance.
Command mode: All
show spanningtree mst configuration
Displays the current MSTP settings.
Command mode: All
show spanningtree mst <0‐32> [information]
Displays Spanning Tree information for the specified instance. 0 is used for
CIST.
CIST bridge information includes:
Priority
Hello interval
Maximum age value
Forwarding delay
Root bridge information (priority, MAC address, path cost, root port)
CIST port information includes:
Port number and priority
Cost
State
For details, see page
Command mode: All
75.
82.