SNMPv3 Community Table Configuration
382
G8264 Command Reference for ENOS 8.4
These commands are used for configuring the community table entry. The
configured entry is stored in the community table list in the SNMP engine. This
table is used to configure community strings in the Local Configuration Datastore
(LCD) of SNMP engine.
Table 163.
SNMPv3 Community Table Configuration Options
Command Syntax and Usage
snmpserver community <1‐16> index <1‐32 characters>
Allows you to configure the unique index value of a row in this table.
Command string: Global configuration
snmpserver community <1‐16> name <1‐32 characters>
Defines the user name as defined in the following command:
snmpserver user <1‐17> name <1‐32 characters> on page
Command string: Global configuration
snmpserver community <1‐16> tag <1‐255 characters>
Allows you to configure a tag. This tag specifies a set of transport endpoints to
which a command responder application sends an SNMP trap.
Command mode: Global configuration
snmpserver community <1‐16> username <1‐32 characters>
Defines a readable string that represents the corresponding value of an SNMP
community name in a security model.
Command mode: Global configuration
no snmpserver community <1‐16>
Deletes the community table entry.
Command mode: Global configuration
show snmpserver v3 community <1‐16>
Displays the community table configuration.
Command mode: All
378.