Edge Virtual Bridge VSI Type Profile Configuration
© Copyright Lenovo 2017
The following table describes the Virtual Station Interface Type profile
configuration options.
Table 374.
Edge Virtual Bridge VSI Type Profile Configuration Options
Command Syntax and Usage
virt evb profile <profile number>
Enter Virtual Station Interface type profile configuration mode.
Command mode: Global configuration
[no] reflectiverelay
Enables or disables VEPA mode (Reflective Relay capability).
Command mode: EVB Profile
[no] vsidiscovery
Enables or disables VSI Discovery (ECP and VDP).
Command mode: EVB Profile
no virt evb profile <profile number>
Deletes the specified EVB profile.
Command mode: Global configuration
evb profile <1‐16>
Applies the specified EVB profile for the port. Automatically enables LLDP
EVB TLV on the corresponding port.
Command mode: Interface port
no evb profile
Resets EVB profile for the port. Automatically disables LLDP EVB TLV on the
corresponding port.
Command mode: Interface port
show virt evb profile [<1‐16>]
Displays the current EVB profile parameters.
Command mode: All
show virt evb profile ports
Displays all EVB profile parameters including ports.
Command mode: All
Chapter 4: Configuration Commands
655