Static Flows Configuration - Lenovo RackSwitch G8264 Command Reference Manual

Static Flows Configuration

666
G8264 Command Reference for ENOS 8.4
Static flows are ACL OpenFlow entries set up manually from the CLI by the
administrator. Static flows cannot be deleted/modified by OpenFlow controllers
and will continue to function when the switch goes into emergency mode. Even if
they qualify as FDB entries based on their settings, static flows are always stored as
ACL entries. A total of maximum 750 static flows pool is shared between all
OpenFlow instances.
The following table describes the static flow configuration options:
Table 376.
Static Flows Configuration Options
Command Syntax and Usage
static­table add index <1‐750> match <matching qualifier>
actions <matching qualifier> [options <matching qualifier>]
priority <0‐65535>
Adds a static flow entry to the instance.
Command mode: OpenFlow Instance
static­table modify index <1‐750> match <matching qualifier>
actions <matching qualifier> [options <matching qualifier>]
priority <0‐65535>
Overwrites a static flow entry.
Command mode: OpenFlow Instance
static­table remove index <1‐750>
Deletes a static flow entry.
Command mode: OpenFlow Instance
clear openflow table static
Deletes all static flow entries.
Command mode: Privileged EXEC