Lenovo RackSwitch G8264 Command Reference Manual page 664

664
G8264 Command Reference for ENOS 8.4
Table 375.
OpenFlow Configuration Options (continued)
Command Syntax and Usage
[no] table­miss controller
Sets or disables the table­miss flow entry to send packets unmatched by
any flow entries to the controller.
The default value is disabled, meaning packets unmatched by flow entries
are dropped.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
[no] openflow fdb­aging
Enables or disables periodical clearing of dynamically learned FDB entries on
a specific port.
The default value is disabled on OpenFlow edge ports.
Command mode: Interface port/Interface portchannel
[no] openflow static­station­move
Enables or disables forwarding frames that have source MAC addresses
conflicting with entries in the static FDB table. This enables equal cost
multi‐path routing and use cases where IPS and Firewall devices forward
packets without changing the source MAC address.
The default value is disabled.
Command mode: Interface port/Interface portchannel
clear openflow {group|table [basic|emergency|dynamic|
|static]}
Clears OpenFlow data for all instances:
The group option clears the OpenFlow 1.3 group table.

The table option clears all basic and emergency OpenFlow tables in

OpenFlow 1.0. In OpenFlow 1.3, clears the dynamic and static flow tables.
• The basic option clears only the basic OpenFlow tables.
• The emergency option clears only the emergency OpenFlow tables.
• The dynamic option clears only the dynamic OpenFlow tables.
• The static option clears only the static OpenFlow tables.
Command mode: Privileged EXEC