Show All Arp Entry Information - Lenovo RackSwitch G8264 Command Reference Manual

Show All ARP Entry Information

96
G8264 Command Reference for ENOS 8.4
The following command displays ARP information:
show [ip] arp
Command mode: All
Mgmt ARP entries:
Total number of Mgmt ARP entries : 2
IP address Flags MAC address VLAN Age Port
­­­­­­­­­­­­­­­ ­­­­­ ­­­­­­­­­­­­­­­­­ ­­­­­­ ­­­ ­­­­
10.11.11.1 00:33:00:33:00:00 4095 20 MGT
10.11.11.212 P 08:17:f4:ae:be:fe 4095 MGT
Data ARP entries:
Current ARP configuration:
rearp 5
Current static ARP:
IP address MAC address Port VLAN
­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­­­ ­­­­­ ­­­­
27.0.200.1 00:ff:00:00:01:00 1 2
27.0.201.1 00:ff:00:00:01:00 1 2
Total number data ARP entries : 188
IP address Flags MAC address VLAN Age Port
­­­­­­­­­­­­­­­ ­­­­­ ­­­­­­­­­­­­­­­­­ ­­­­­­ ­­­ ­­­­­
1.3.0.1 08:17:f4:c4:54:00 13 9 13
1.3.0.3 P 08:17:f4:ae:be:00 13
3.4.0.3 P 08:17:f4:ae:be:00 6
3.4.0.4 74:99:75:be:26:00 6 290 TRK65
3.5.0.3 P 08:17:f4:ae:be:00 19
The Port field shows the target port of the ARP entry.
The Flags field is interpreted as follows:
Table 43.
ARP Flag Parameters
Flag Description
P
Permanent entry created for switch IP interface.
R
Indirect route entry.
U
Unresolved ARP entry. The MAC address has not been learned.