System User Id Configuration - Lenovo RackSwitch G8264 Command Reference Manual

System User ID Configuration

© Copyright Lenovo 2017
Table 171.
User Access Control Configuration Options
Command Syntax and Usage
show access user
Displays the current user status.
Command mode: Privileged EXEC
clear line <1‐12>
Ejects the user with the corresponding session ID from the G8264.
Command mode: Privileged EXEC
The following table describes the System User ID commands.
Table 172.
User ID Configuration Options
Command Syntax and Usage
[no] access user <1‐20> enable
Enables or disables the user ID.
Command mode: Global configuration
access user <1‐20> level {user|operator|administrator}
Sets the Class‐of‐Service to define the user's authority level. Enterprise NOS
defines these levels as: User, Operator and Administrator, with User being the
most restricted level.
Command mode: Global configuration
access user <1‐20> name <1‐64 characters>
Defines the user name of maximum eight characters.
Command mode: Global configuration
access user <1‐20> password
Sets the user (user) password. This command will prompt for required
information: current admin password, new password (up to 64 characters) and
confirmation of the new password.
Command mode: Global configuration
no access user <1‐20>
Deletes the user ID.
Command mode: Global configuration
show access user
Displays the current user ID configuration.
Command mode: Privileged EXEC
Chapter 4: Configuration Commands
391