IGMP Multicast Routers Maintenance
738
G8264 Command Reference for ENOS 8.4
The following table describes the maintenance commands for IGMP multicast
routers (Mrouters).
Table 415.
IGMP Multicast Router Maintenance Commands
Command Syntax and Usage
show ip igmp mrouter [dynamic|interface|portchannel|static]
Displays information for all Mrouters, all dynamic/static Mrouter ports
installed or Mrouter ports specific to a specified interface/portchannel.
Command mode: All
show ip igmp mrouter information
Displays IGMP snooping information for all Mrouters.
Command mode: All
show ip igmp mrouter vlan <VLAN ID (1‐4094)>
Displays IGMP Mrouter information for a single VLAN.
Command mode: All
show ip igmp querier vlan <VLAN ID (1‐4094)>
Displays IGMP querier information for a single VLAN.
Command mode: All
show ip igmp relay
Displays IGMP relay information.
Command mode: All
show ip igmp snoop igmpv3
Displays IGMPv3 snooping information.
Command mode: All
clear ip igmp mrouter
Clears the dynamic IGMP Mrouter port table.
Command mode: Privileged EXEC