Igmp Filtering Configuration - Lenovo RackSwitch G8264 Command Reference Manual

IGMP Filtering Configuration

IGMP Filter Definition
© Copyright Lenovo 2017
The following table describes the commands used to configure an IGMP filter.
Table 313.
IGMP Filtering Configuration Options
Command Syntax and Usage
ip igmp profile <1‐16>
Configures the IGMP filter. To view command options, see page
Command mode: Global configuration
[no] ip igmp filtering
Enables or disables IGMP filtering globally.
Command mode: Global configuration
show ip igmp filtering
Displays the current IGMP Filtering parameters.
Command mode: All
The following table describes the commands used to define an IGMP filter.
Table 314.
IGMP Filter Definition Options
Command Syntax and Usage
ip igmp profile <1‐16> action {allow|deny}
Allows or denies multicast traffic for the IP multicast addresses specified.
The default action is deny.
Command mode: Global configuration
[no] ip igmp profile <1‐16> enable
Enables or disables this IGMP filter.
Command mode: Global configuration
ip igmp profile <1‐16> range <IP address 1> <IP address 2>
Configures the range of IP multicast addresses for this filter.
Command mode: Global configuration
no ip igmp profile <1‐16>
Deletes this filter's parameter definitions.
Command mode: Global configuration
show ip igmp profile <1‐16>
Displays the current IGMP filter.
Command mode: All
583.
Chapter 4: Configuration Commands
583