Vnic Information - Lenovo RackSwitch G8264 Command Reference Manual

vNIC Information

180
G8264 Command Reference for ENOS 8.4
The following command displays the current Virtual NIC (vNIC) parameters:
show vnic
Command mode: All
Current Settings for vNIC Feature:
State: On
vNICs:
11.1 : Enabled, Max Bandwidth (increments of 100Mbps) 25
vNIC Group 32: Enabled, VLAN 32
vNICs: 11.1
Ports: empty
Uplink Port: 20
Uplink failover: Enabled
The following command displays Virtual NIC information:
show vnic vnic [all]
Command mode: All
vNIC vNICGroup Vlan MaxBandwidth Type MACAddress Link
­­­­­­­ ­­­­­­­­­ ­­­­­­ ­­­­­­­­­­­­ ­­­­­­­ ­­­­­­­­­­­­­­­­­­ ­­­­­­
1.1 10 10 25 default none down
50.2 4 44 25 default 00:00:c9:93:d2:07 up
53.1 # * 10 default none disabled
53.4 4 44 25 default 00:00:c9:93:d5:03 up
# = Not added to any vNIC group
* = Not added to any vNIC group or no vlan set for its vNIC group
vNIC information includes the following for each vNIC:
 vNIC ID
 vNIC Group that contains the vNIC
 VLAN assigned to the vNIC Group
 Maximum bandwidth allocated to the vNIC
 vNIC type (default or FCoE)
 MAC address of the vNIC, if applicable
 Link status (up, down or disabled)