Show Specific System Information
© Copyright Lenovo 2017
Note: The display of temperature will come up only if the temperature of any of
the sensors exceeds the temperature threshold. There will be a warning from the
software if any of the sensors exceeds this temperature threshold. The switch will
shut down if the power supply overheats.
System information includes:
System date and time
Switch model
Switch name and location
Time of last boot
MAC address of the switch management processor
Software image file and version number, and configuration name.
IP address of the management interface
Hardware version and part number
Log‐in banner, if one is configured
Internal temperatures
Fan status
Power supply status
The following table lists commands used for displaying specific entries from the
general system information screen.
Table 18.
Specific System Information Options
Command Syntax and Usage
show environment fan
Displays information about internal temperatures and fan status.
Command mode: All
show environment power
Displays information about power supply status.
Command mode: All
show version brief
Displays the software version number, image file and configuration name. For
a sample output, see below.
Command mode: All
Sample output for command show version brief:
Software Version 8.4.1.0 (FLASH image1), active configuration.
Displays the software version number, image file and configuration name.
Chapter 2: Information Commands
47