IPv6 Default Gateway Configuration
© Copyright Lenovo 2017
The switch supports IPv6 default gateways, as follows:
Gateway 1: data traffic
Gateway 4: management port
The following table describes the IPv6 Default Gateway Configuration commands.
Table 343.
IPv6 Default Gateway Configuration Options
Command Syntax and Usage
ip gateway6 {1|4} address <IPv6 address> [enable]
Configures the IPv6 address of the default gateway, in hexadecimal format
with colons (such as 3001:0:0:0:0:0:abcd:12). The enable option also
enables the gateway.
Command mode: Global configuration
[no] ip gateway6 {1|4} enable
Enables or disables the default gateway.
Command mode: Global configuration
no ip gateway6 {1|4}
Deletes the default gateway.
Command mode: Global configuration
show ipv6 gateway6 {1|4}
Displays the current IPv6 default gateway configuration.
Command mode: All
Chapter 4: Configuration Commands
619